Smoke is not always a signal that there is a fire nearby and a reason for an emergency call to the fire department. For a long time, smoke has been used during concerts and parties as a decorative element that adds spectacular performance. For such cases, smoke generators are created and are being created, which are sold in specialized stores and cost a lot of money. We suggest that you spend a few minutes to familiarize yourself with this material in order to save money that would go towards the purchase of a smoke generator.
As you already guessed, we will do a small smoke generator, however, before moving on to the manufacturing process, we suggest that you familiarize yourself with the author’s video.
So we need:
- a gun for soap bubbles;
- electronic cigarette;
- screwdriver;
- drill;
- drill;
- stationery knife.
First of all, we need to disassemble the gun and remove from it several unnecessary parts for our generator. We begin to unscrew the screws and remove the batteries.
Next, remove the frame that is in front of it.
The next thing we take is an electronic cigarette and remove the sensor from it.
After that, we need to drill a hole on the sensor.
Insert the sensor back into the cap.
Now we need to make sure that the sensor fits into the "barrel" of the toy gun. Most likely, without some modifications this will not work, as the author does not. To do this, you will have to remove all unnecessary clerical knife.
We drill a hole for the diameter of an electronic cigarette.
Now insert the electronic cigarette into the gun duct.
Putting the toy back.
Thus we get a quite good and miniature smoke generator in the form of a gun. The soap bubble gun itself will henceforth “shoot” not with bubbles, but with smoke. We’ll add that especially for an electronic cigarette, if you wish, you can buy liquid tobacco with different smells and aromas, which will double surprise your guests when they not only see your homemade, but also feel the aroma of some fruit or flower.