Today I want to talk about how you can do it yourself devicethat will help you glue the photo frame ...
To start, I suggest you watch this video homemade:
[media = http: //www.youtube.com/watch? v = JEuJHssG2uU]
So, if you want to make a beautiful wooden photo frame or if your frame has broken and you want to fix it by gluing, then this article is for you ...
In order to make a frame, when gluing, all 4 wooden rivers must be held strictly at an angle of 90 degrees for a long time ... Doing this with your hands is very inconvenient and extremely tiring, so in this article I will tell you about how to make a device for so that the frame sticks together without your participation ...
So, let's begin...
For this crafts we will need:
- two ropes ("closed" - that is, "rings");
- the neck of a multi-liter bottle;
- steel wire in the shape of a snake;
To begin with, make four cuts in the neck and one or two holes in the sidewall ...
So, after you put glue on the frame, you need to fix it ... To do this, put one of the ropes on one edge of the frame, then twist it and put on the opposite corner of the frame ...
We perform the same operation with the remaining corners of the frame and with the second rope ... As a result, we get this design:
Further, in the slots that we made earlier in the neck, carefully insert the ropes ...
Next, with the help of a snake wire, gently stick the ropes through the neck ...
Now you need to tighten the ropes with the rotational movements of the wire and to fix the edges of the wire into the holes in the side of the neck as shown in the photo ...
That's all!!! Our device for fixing a glued photo frame is ready !!! Now you can safely go about your business, knowing that the frame is glued neatly at the right angle ... Good luck !!!