We make pepper spray do it yourself

Pepper or gas spray is a means of civil defense. It can be purchased in specialized stores, but the nickname of our site is to help you save time and nerves that can be spent on going to the store. That is why we decided to present you the material for making pepper spray in home conditions.

First of all, we offer to watch the video



So we need:
- spray can;
- nipple;
- glue gun;
- pump;
- a plastic tube with which we will pump pepper mixture into a spray can;
- ground pepper;
- ethanol;
- drill;
- a drill.

First, we note that the author uses a spray of hairspray, but you can use almost any spray, whether it is from a deodorant or something else. We’ll also clarify that there will also be no problem with the choice of nipples, since both bicycle and automobile nipples are suitable for the manufacture of pepper spray. Everything is clear with the materials, you can get to work.

First of all, we need to make a hole on the bottom of the spray can. If the can is not empty, as the author, then it must be emptied.

Next, insert the nipple into the hole made at the bottom of the can and glue it with glue. It should be noted here that when choosing a spray can you need to pay attention to the fact that the tube in it reaches the bottom.

While our glue dries, we need to prepare a mixture for our pepper spray. It will consist of ethyl alcohol and ground black pepper. In general, factory cartridges use a mixture of other components that are very difficult to get in ordinary stores, so the author offers an alternative way. Pour pepper and mix.

Our pepper spray will be refillable. In order to fill it, we need to unscrew the spool from the nipple and fill it with a tube. We insert one end of the tube into the mixture, slightly retract it so that it gets into the tube. After that, insert the second end into the nipple and gradually fill the pepper mixture into the can.

When the can is full, we need to screw in our spool so that the liquid that we filled in does not pour out.

Now, using the pump, we pump air into the can. According to the author, there is no need to upload a lot. 2-3 times are enough.