Today I want to tell you about how you can in home conditions to make a fly swatter with the function of shelling insects.
To begin, I suggest you watch a video on how to make this fixtures
[media = http: //www.youtube.com/watch? v = euZZKl_mivY]
In this article, I will show you how to make a home-made fly swatter with a shot function. Why is there a shot function here? Well, for example, if the same fly that causes you discomfort crawled up to where you could not physically physically climb into it to kill the pest. You can shoot from our device and thus kill the fly in a place inaccessible to the fly swatter itself. Also, in the "pluses" of our homemade It includes the fact that this homemade product is reusable, versatile and compact.
We need an umbrella that is out of order or simply broken. Rather, we will need the "core" of the umbrella itself.
So, at the end of this rod with a handle, gently attach a clerical clip as shown in the photo.
Next, we will attach to the clamp different types of surfaces that can be used to kill an insect: it can be thick matter (for sharper and more medium-sized insects):
Or mesh "killer" (for not large and "ordinary" insects):
Well, for large and sharp insects that are difficult to kill, we will clamp with a slipper clamp.
With the help of a slipper you can deliver a very fast, sharp and powerful blow and do not leave the insect with a single chance.
This is about killing insects with my own efforts, and now I’ll tell you just about this “shooting function”.
So, you need to take the gum (you can take it as an ordinary gum, but it’s better to take a thicker one of course) and gently pull it as shown in the photo (you can pull a few gum by the way so that there are a few “shots”).
After you pulled on the elastic bands, which will act as cartridges and see your target, you just need to aim and press the button to open the umbrella.
Due to the fact that by pressing the button you lower the lever down, you sharply release the elastic from tension and it quickly flies to the target, thereby causing damage to your insect.
The fly swatter is compact enough, we tighten the slippers and the gum with an elastic band and store the fly swatter. And you can practically store the “nozzles” with which you kill targets in the slipper itself.
