Homemade cleaning nozzle for a vacuum cleaner

To start, I suggest you watch a video of our future homemade:

Over time, the carpet or upholstery of the sofa ceases to be the same as when buying - the pile is no longer so soft, it “lies” and therefore the sofa does not seem so soft. And in the process of long use, you could inadvertently pour something onto a sofa or carpet or dust, which accumulates for a long time causes a feeling of some kind of crust on a sofa or carpet.

Today in this article I just want to tell you how you can remove this “peel” and update the sofa by lifting the pile and cleaning it.

For our homemade product we need only one component - this is a plastic bottle (we need a bottle of any size - we took 1.5 liters).

We cut off part of the bottle at an angle to get such a “scoop”:

Next, you need to make a lot of such cuts (about 3-4 cm long). It turns out here is such a "fringe" as shown in the photo:

After that, with the help of fire (in our case, a lit candle), you need to carefully bend this “fringe” to get such a design:

Now we take the cap from under the bottle and make a kind of ring out of it (make a hole) ...

After that, we twist the resulting ring onto the bottle and carefully insert it into the vacuum cleaner pipe as shown in the photo:

That's all! Our nozzle is ready! Now you can clean and upgrade your sofa or carpet. Thanks to our "fringe" you can clean and raise the pile, and your sofa will be new again !!!

Good luck !!!