On our site, we managed to consider several options for manufacturing a wide variety of nightlights and lamps. We decided to devote this material to the subject of manufacturing a USB night light, which is uncomplicated in its design, which means that almost everyone can cope with the task.
We present to your attention a video on making a homemade USB night light
So what we need:
- two ordinary bulbs;
- regular CD drive;
- Light-emitting diode;
- USB wire.
The materials are very simple, so you can safely get to work. First of all, we need to separate the bulb from one light bulb and the base from the other.
We also glue several small diameter washers on the upper part of the base, after making a hole on it.
Next, take the old CD and cut out a small figure in the form of a zipper.
After that, we have to solder the USB cable to our LED. You can find out which wires you need to solder to the plus and minus of the LED, as well as how to determine the plus and minus of the LED in our past materials.
Check whether everything is done correctly.
Insert the lightning into the bulb from the bulb. Next, glue the lightning to the neck of the bulb from the bulb, after having previously put a wire on it, which will allow the bulb to be attached to the cap.
We glue the LED to the base of the base.
We attach the base to the bulb.
According to the author, for greater effect, distilled water can be poured into a light bulb.
In the end, you can take care of a beautiful stand. The author makes it from a small piece of organic glass. Although the process of making the stand is not separately presented by the author homemadeHowever, we note that there is nothing complicated: you just need to cut a piece of plexiglass, make a round recess on it, into which the bulb from the bulb will be inserted.
Finally, it remains to glue the flask to the base and also to the stand.
It remains to connect our night light to a power source and enjoy a beautiful sight. In the end, we add that such a nightlight cannot become a source of lighting, since it does not give enough light. It is intended solely for decorative purposes.