» Video »Making subwoofer headphones

Making subwoofer headphones


Subwoofer headphones are especially popular among professionals as well as music lovers. Such headphones transmit a clearer sound that allows you to enjoy your favorite music. However, not everyone can buy subwoofer headphones, since they cost a lot of money. What to do if there is a great desire to get such headphones, but there are no corresponding means? You will find the answer to this question in this material.

And first we suggest you get acquainted with the author’s video




What do we need:
- round headphones;
- speakers;
- construction tape;
- screws;
- cotton wool;
- glue gun.

Let's start right away with the shape of the headphones. It completely depends on the shape of the speakers. The author uses round speakers, so his headphones are round in shape. As for construction tape, we do not need it entirely: we need a cardboard pipe, that is, its base. The speakers can be removed from the TV, as the author does.

First we need to disassemble the headphones. You need to disassemble almost completely. We throw out the old speakers from there, that is, there are plastics with wires and rubber elements.

We cut off the old wires and connect new ones with connectors for new speakers. If there are none, then you can leave the old wires, but in this case you will have to solder the new speakers with a soldering iron.

For greater convenience, you can remove the plastic mounts of the new speakers and use them between the speakers and rubber elements.

We take a cardboard ring from an old adhesive tape and divide it in half.

For greater aesthetics, you can wrap the rings with red tape, as the author does.

We begin to collect headphones. First, we fasten the speakers to plastics.

We put rings on the speakers, connect the wires. Check whether everything works as intended.

Apply a layer of hot glue to the plastic parts of the headphones.

Glue the first ring.

We hammer in cotton wool.

We put another layer of glue on the ring, after which we glue the speaker itself.

Repeat the same with the next speaker.

We put on rubber parts.

Subwoofer headphones are ready.In the end, we note that the new design of the headphones can harm the auditory mechanism if you listen to music too long and too loudly. The fact is that new speakers transmit lower frequencies, so you need to be extremely careful and follow all safety rules. Do not use headphones with the amplifier.
10
10
8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Guest Edward
This is exactly what the amplifier is needed for, the new speakers have a resistance of 4 ohms, and this will result in an overload current output of the player, smartphone or computer, and the player and smartphone have a small power, and it will not be enough for the new speakers to work properly
Quote: "Do not use headphones with an amplifier."
Bravo!

We advise you to read:

Hand it for the smartphone ...