In this article, we will talk about how to make an electroscate by yourself. It’s no secret to anyone that today, there is a whole mass of analogues for everything that is possible. And at the same time, as a rule, such analogues are much cheaper than the “originals”.
An electric skateboard is no exception. If the purchase costs about a thousand dollars, then creating the same, only on your own, will come to you, much cheaper. So why not take up such a job ?!
Home-made equipment is capable of speeds up to thirty kilometers per hour, and at the same time, it will have full brakes. In a word, no worse than a branded skateboard.
Step 1: Platform.
In order to make the ride smoother and the stability higher, it is best to take a longboard, instead of a regular skateboard. Moreover, you will have much more space to add additional elements.
Remember that the base itself, namely the board, must be very solid. If we talk about wheels, then you need to take a large diameter.
Step 2: Electronics.
You will have one engine or two, only you decide. If you want to get a cheaper analogue, then of course, it is better to make only one engine.
Remember that the main characteristics of such an engine are primarily power and higher torque.
Moreover, a special speed controller, which must withstand heavy loads, will also be needed. It is advisable to buy it new for a long service. After you decide on the regulator, it is necessary to connect the engine and the battery compartment. Sex work done, moreover, the main one.
Step 3: installing the motor.
Gear designed for skateboard can be purchased at the store. Next, install it with teeth on the motor itself. And only after that, pass everything through the belt.
Remember, before you install the engine, do not forget about installing the clamps on the bolts themselves. It is very important.
As for the design, all this is already being done to your taste. Create for health.