There will be such a person who will love fishing and there are, by no means, such a few. But for fishing to bring not only pleasure from the process, but also good fishing, you need a good bait.
So, this article will describe the process of how to make a skeleton from metal on silver carp.
After all, as you know, shopping, as always, are no good. There is no quality, no efficiency.
To do this, you need:
• A few cloves, preferably 3 pieces
• Ordinary metal wire
• Medium sized durability
• Pliers
• Lighter
First you need to drive three nails into the board
Now, begin to bend the legs of the wire
Press the whole thing with pliers, but not completely.
Next, bite off the last tip of the wire at the same level as the bent one.
Cut a piece of shrink cambric
It's time to burn the resulting piece of cambric with a lighter.
Now cut it to its full length and put it on top, then again burn everything with a lighter. All locks must be done with a thin dropper. As a result, simple skeletons are obtained, which are better than store skeletons. Try it and you will succeed
