Video cans from the canister:
[media = https: //www.youtube.com/watch? v = Zbf0_0cxNt4]
I decided to write today's article for those who have country house or summer cottage. It will be about watering plants. There are many ways to water the plants: you can buy special nozzles (but this is a waste of money), you can water the plants from a watering can (but you need to bend down to each plant - after that your back hurts and there is incorrect posture), you can simply direct the hose to the plant ( but this option is also not always convenient and not all plants can be watered in this way). After analyzing this problem, I came to the conclusion that you can yourself in home conditions to make a device (watering can) for watering plants, which will help you not to bend, thereby preserving the health of your back and changing the irrigation regimes (that is, you can water both with a jet and disperse water).
For the manufacture of our universal country watering can, we need the following components:
- old unnecessary canister (10 - 20 liters);
- crane (you can do without it, but with it our design will take on a more aesthetic appearance);
- the tube is flexible (about 1 meter, we took a transparent tube for aesthetics);
- a small piece of the same flexible tube (approximately 10 cm);
- a rigid tube (approximately 0.5 meters, we took part from an old fishing rod);
- belt (in order not to drag the canister along with you, but hang it on your shoulder);
- a container from under the film (it will serve us as a nozzle for spraying water).
So, at the extreme bottom point of the canister, make a hole that will be slightly smaller in diameter than the diameter of the flexible tube:
Carefully insert the flexible tube into the hole we made in the canister
Next, take the tap and gently pull the flexible tube onto the tap. On the other side of the crane we stretch a piece of flexible tube so that approximately 3-4 cm is worn on the crane, and the remaining 5-6 cm peek out:
After that we take a rigid tube and gently pull it onto the peeking part of the flexible tube.
Everything should be tight so as not to let a drop of water pass through, so pull it as best as possible.
Now we attach the belt to the canister handle.
Next, you need to make a nozzle that will spray water. A container from under the film is useful for this. In the container lid we make a hole in diameter coinciding with the diameter of the rigid tube.
Next, put on the cap with a hole on a rigid tube
In the container itself, we make many small holes.
Our universal watering can for watering plants is ready!
We collect water in the canister:
Close the lid of the canister tightly and put the structure on the shoulder. Next, slightly open the lid on the canister, thereby creating pressure. Next, open the tap and as you can see the water is pouring:
Now we put the container nozzle on a rigid tube and open the water:
As you can see, everything works great! Thus, you saved you from the “forever bent back” and now you will be able to water plants with pleasure at your summer cottage!