Hello again to everyone.
In this article, I will show you how to cheaply decorate your case from a PC.
First let's watch the video
Somehow it occurred to me to make a backlight for the case using lamps from the monitor. These are the lamps
But there was no converter for him.
Well, I had to buy an LED strip from Auto 12 volts. It costs in the order of 200 to 400 rubles.
So let's get started.
Step 1 - what we need
- LED strip 1 meter
- Volume control from the speakers (we will use it to adjust the brightness)
- On and Off button (Any)
- soldering iron
- Hot glue
- Well, screwdrivers.
Do not forget about straight arms.
Step 2 - Well, let's get started
Cut the LED strip in half 50 to 50 and glue it on the sides of the case. So that the wires were down, they reached the power and the front bar.
Take the bar from the case and cut a hole for the regulator and buttons.
Glue with hot glue and solder everything according to the scheme.
If you did everything right, then you should be able to do something like this
Do not forget to solder + to the yellow wire, and - to any of the black wires, preferably one that is away from the yellow one.
Step 3 - We give the case a perfect look
Well, if we did everything, as we said before, then everything should turn out like this.
Well, if everything is clear to everyone, then good luck to you and Happy New Year friends, wait for new homemade, with you was VovaNSA.
Good bye.