After acquiring a private house, first of all, you should think about a bathroom on the street, even if there is one in the house itself. A street toilet is a very profitable building in the warm season. At the same time, working in the garden, one does not need to go into the house in dirty clothes. It is built quickly enough and the construction will cost quite inexpensively. Walls can be built from various materials: boards, slate, brick, cinder block, etc., but do not forget about the external beauty of the bathroom.
We bring to your attention the option of building a street toilet from cinder block.
Necessary materials
1. Red brick (depending on the size of the cesspool).
2. Old boards.
3. Fittings.
4. Sand, crushed stone, cement.
5. Hatch for the cesspool.
6. Concrete blocks (12 cm thick).
7. Frame for the doorway.
8. The window frame.
9. The door.
10. The window.
11. Plastic (for interior decoration).
12. Tiles (for interior decoration).
13. A toilet bowl with a tank.
14. Decorative mesh (for vents).
15. Decorative stone.
16. Slate or other roofing material.
17. Decorative stone for external wall decoration.
To begin with, it is worth deciding on the place of the future bathroom. It must be removed from the recreation area, but the path to it should not be difficult.
It is necessary to dig a 2x2.5 hole with a depth of 1.5 m.
The bottom is not concrete, and the walls are laid out of red brick. Why exactly red? Because it is more resistant to moisture. In this case, do not forget about the gaps between the bricks, which should be quite a lot. They are needed so that moisture goes into the ground.
On the upper perimeter of the walls of the pit, formwork should be laid and a hole of 150 mm should be left for mounting the drain. Behind the pit, provide a hole with a diameter of 50 cm for the hatch.
Reinforcements, old boards should be laid on the formwork and poured with previously prepared cement mortar (cement, sand, gravel and water). This is the future floor of the summer bathroom. For reliability, it should be 10 cm high.
Paul freezes for several days. If the weather is hot, then to prevent cracks, it must be periodically watered.
Then the walls of concrete blocks are laid out, but first you need to install and fix the frame for the doorway. If desired, you can think of a window.
On top of the walls, it is necessary to install logs and formwork for the future ceiling with a slope for draining water.
Pour the ceiling with cement mortar and, after solidification, cover with any roofing material of your choice.
The door is hung and a window is installed.
The interior decoration begins.Walls and floors can be tiled, and the ceiling sewn with plastic.
A toilet is installed with a tank. An outlet should be made in the wall and covered with a decorative mesh.
Then water and light are supplied. Plastic or metal-plastic pipes for water must be laid through the air in order to flush water during the winter period.
An exhaust pipe is installed from the cesspool so that unpleasant odors do not enter the bathroom.
It is necessary to install a sewer hatch.
The outer walls of the street toilet can be painted with water-based paint, or coated with decorative stone.
That's all.