From packing cardboard you can make such a house for a pet. It looks original, and representatives of the cat family, apparently, like.
To make a house for a cat, the author needed:
- packing cardboard 6 mm thick;
- compass;
- stationery knife;
- ruler;
- PVA glue and brush.
To make a cat house you need to draw 8 circles on cardboard sheets with radii of the following sizes: 18 cm, 18.5 cm, 19 cm, 19.5 cm, 20 cm, 20.5 cm, 21 cm, 21.5 cm. a large circle with a radius of 21.5 cm is the bottom of the house, if desired, you can cut 2-3 of the same circle and glue them for a warmer floor.
In the other 7 circles, inside the compasses you need to draw circles so that the width of each part is 4 cm - this will be the wall thickness of the cat's house. Of the smallest central circles, only one is useful to complete the roof of the house, the rest will have to be thrown away.
Cut the workpiece.
When the blanks are cut, you need to assemble a house. Each layer differs from the previous and the next by 5 mm.
The door is cut as shown.
You can draw the door in assembled form, and then make cuts on a single blank.
When the slots are made, the house is going for a check.
If everything worked out correctly, you need to glue each layer, smearing cardboard with a brush with PVA glue.
To dry, you need to leave the house for at least 24 hours. Then it remains only to lay the litter to offer the pet to settle in a new house.
