If the name of the video did not tell you anything, then you probably do not remember children's fun. And now sadness overtook you when you remembered the past childhood? You should not despair, because in this material we will help to recall past funs and even improve them. In this material, a review of the video on the manufacture of a multiple-charge rubber arrow will be made.
We suggest starting with viewing the author’s video material for the manufacture of rubber arrows
So, what do we need:
- a pencil;
- plastic tube;
- clothes pegs;
- gum;
- glue gun;
- adhesive tape
First you need to disassemble the clothespins into two parts, in other words, disconnect the halves.
The next thing you need to take care of the handle for our rubber arrow. It can be made from several pieces of clothespins that need to be glued with a glue gun on a pencil.
According to the author of the idea, three pieces of clothespins are enough.
After that, take another piece and cut off its upper part. If the clothes pegs are plastic, like the author’s, then you can cut off with a sharp knife, if the clothes pegs are made of wood, then you need a hacksaw or cloth.
The resulting piece must be glued to the front of the rubber arrow, that is, to the second end of the pencil. It is for this piece that gum will cling.
Then we take a clothespin and wrap its edges with tape so that the clothespin is in the open state.
The ends of the clothespins must be given a slope.
Approximately in the area of the handle of the rubber arrow, it is necessary to make three cuts under the rubber bands.
On the handle you need to stick something long. The author, for example, uses a wooden barbecue skewer.
Next, we take a plastic tube, from which we cut a small piece.
This piece must be glued to the clothespin on which the adhesive tape is wound.
After this, you need to take another piece of clothespins and glue the rubber arrow on the nose.
We put a clothespin with a straw on the barbecue skewer, sticking the straw in the skewer.
After that, glue the skewer to a piece of clothespins. After that, the clothespin will move freely along the skewer. On this rubberbolt is ready.
In order to charge it, you need to use three doubled gum.If you wish, you can not fold the elastic bands, but cut them off, cut them in half and tie the ends into a knot.
We put the gum in the cuts. Shoot our weapons will be when we pull the clothespin on the skewer to ourselves.
