Thanks to ordinary LEDs, you can improve your carby making the background illumination of his number. Thus, the author immediately killed two birds with one stone: making the backlight red, he did not make a stop signal. In a similar way, the author highlighted not only the car number, but the inscription Nissan, in general, it turned out very beautifully. And most importantly - you can do it yourself.
We will need:
- LEDs;
- plexiglass;
- frame;
- soldering iron;
- screamed;
- wires.
Step 1
So, the author began work by sawing in a frame of letters. Here, everything is quite simple, just act carefully so that the letters are even.
Step 2
Next, cut out the back of the frame under the highlight of the future inscription.
Step 3
Paste a piece of plexiglass, glue it with an oracal red color (oracal is a special film that is often used to create sliding wardrobes).
Step 4
The author has two white diode strips in the back of the frame under the inscription, the other tape is red. You can choose a LED strip and a different color - which one you prefer.
Step 5
Now cut out the plexiglas form for the diodes to fit the frame (the diodes in it should be in the form of an oval to evenly shine in all directions). However, there is nothing complicated - a little patience and you will succeed.
Step 6
The matter remains small: all solder, glue, connect.
Step 7
Install on car. Connect the frame to the foot, if you want it to light when you press the pedal.
That's all the work, it looks unusual and spectacular. Thus, you can highlight on your car both the number and the inscription.