How to make a multitool from keys with your own hands

A great idea for those who are uncomfortable with carrying different keys in their pocket. They can be used with one fixtures Multitool.

First, let's see the author’s video:



Necessary tools and materials:
- Any thin aluminum sheet
- Wooden ruler
- Several keys
- 2 bolts with nut
- Paint or stain
- glue

Step 1: First, cut out two tin strips with a length of 9 cm and the width of the ruler itself. And cut them with scissors.

Step 2: Put the keys on a metal cutting. Three keys on one side and three on the other. And draw a marker around the round ends.

Step 3: And cut out two plates

Step 4: After doing two holes on each plate.

Step 5: Now we proceed to the manufacture of the case from the line. We lay down two metal pads on the ruler and circle them with a marker, and then cut them with scissors.

Step 6: We also make two holes on them.

Step 7: Take one tin strip and thread the bolt. There are 3 keys on the bolt. Then we lay the second strip and tighten the nut.

Step 8: Also On The Other Side

Step 9: Now it remains to glue the housing from the ruler onto the structure.

The multitool for keys is ready, if desired, you can paint it with a stain or paint.