In addition to the light source, a beautiful lamp can become an original decorative element in any interior. Today, specialized stores offer customers a wide variety of fixtures. A unique and unique lamp, however, can be made exclusively with one's own hand.
We offer to start the manufacture of the lamp by watching the author’s video
So, what do we need:
- LED Strip Light;
- box for disks;
- wheels;
- the wire;
- crown;
- switch;
- stationery knife.
We take the LED strip and cut it into four flat parts, leaving three LEDs on each of the pieces obtained.
Next, we take an old and unnecessary disk and glue pieces of tape in a square shape on the mirror side. Thus, we got a good reflector.
We take the wire and divide it into thin housing. Using the received wiring, we need to interconnect the pieces of LED strip that are glued to the disk.
To do this, we need a soldering iron, as well as attention, since it is very important not to mix up the lines of pros and cons in pieces. Solder the wiring to the pieces of tape in a sequential manner.
We take the glue gun and glue the disk to the bottom of the box for disks.
We cut off the plastic part of the base of the box on which the disks are worn. Instead, glue the crown or any suitable power source.
We take the switch and under its size with a clerical knife we make a hole in the side of the lid from the disk box.
We connect the switch to the power source and wires coming from the pieces of the LED strip and glue it on the cover with glue.
Next, we take any lace so that if you wish you can hang the lamp and fix it on the lid.
At the end we knit a knot stranglehold to be able to increase and decrease the size of the knot.
We take two more disks and glue the front sides inward so that the mirrored sides remain outside.
Attach the discs to the cover. Disks thus give the lamp a more spectacular look.LEDs shine on the disk up, and it, in turn, reflects light on the lower disk. This will allow you to smoothly distribute light in all directions.
You can connect a USB cable to the lamp if desired.
