» From sites Do-it-yourself aquarium assembly

DIY aquarium assembly

Many people like aquariums but they are very expensive. I decided to try to make my own aquarium of the right size.

We will need:
- glass cutter,
- glass
- sealant,
- gloves
- ruler
- marker
- grinding stone
- electrical tape
- razor blade.

1 step we take glass and put marks on both sides.
2 step we put a ruler and we carry out a glass-cutter on it.
3 step, carefully disconnect the glass with gloves.
4 step cut all sides.
5 step grind all the edges of the glass.
6 step degrease all edges of the glass.
DIY aquarium assembly

7 step glue sealants.
Step 8, glue the joints with electrical tape or make such an edge.

Or so

As you prefer.

Step 9 we remove after drying the excess sealant with a razor blade.

It is necessary to fill the aquarium with water for three days. If there is a leak, glue it to the sealants.

I introduced you to a small and simple aquarium, but you can big:

Or a different form:

Look for others homemade for aquariums at bgm.imdmyself.com

Good luck to aquarium lovers.
7
8
9

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...