Often there is a situation where you solder something and do not have enough hands to hold the workpiece. But if the item is small, then you can burn your hand with a soldering iron. Today I will show you how to make a solder holder. This holder is very convenient to solder, both large circuits and small parts.
First, let's watch the author’s video:
[media = https: //www.youtube.com/watch? v = AlKGR5mgZ60]
Necessary materials and tools:
- a piece of laminate
- 2 bolts
- 6 gadgets
- metal plate
- crocodiles
Step 1: First of all, we need to drill 2 holes for the bolts in a piece of laminate or plywood.
Step 2: Next, insert the bolts on the holes and tighten the nuts by 5 mm.
Step 3: Next, spin another 1 rabbit per bolt from the edge to the floor, see
Step 4: Next we need to make 2 plates. You can choose their size yourself. In the plate, we drill a hole of 5 mm on one edge. under the bolt. And on the other edge by 3 mm. under the crocodile.
Step 5: Next, we fasten the crocodiles to the plates. And we fasten the plates to the bolts.
The solder holder is ready! Now it remains to test it.
