Many who do video reviews or have their own stores feel the need for a turntable. A video is dedicated to the manufacture of such a table, the review of which we decided to devote this material.
Let's start by watching the author’s video
What do we need:
- plastic box for disks;
- an unnecessary drive;
- motor with gear;
- two bolts;
- two nuts;
- adapter;
- plug with wire.
The adapter is a round piece with a small hole in the center. It will provide a rotating movement from the gearbox shaft to the turntable itself. Let's get started.
We remove the cover from the plastic box for disks and fix the motor with the gearbox on it. In the center of the lid from the box there is a hole through which the upper part of the motor will pass. To fix it with bolts, you will need to make two holes at the central one.
We also make a hole for wires coming from the motor on the side of the lid from the box. Pull the wires through this hole.
We take the adapter and install it on the motor.
Next, take an unnecessary disk and glue it strictly in the center of the adapter. When using an adapter with an outer diameter of the center hole of the disk, you can skip the gluing step and simply install the disk in its place.
We connect the wires and get a very beautiful turntable, which can be used for reviews and display of various goods.
