This instruction for creating a sleeping place for a dog, increased comfort, the size of which is 101.6x76.2 centimeters. Let us dwell on the main steps towards the manufacture of a royal pet place.
Step 1: We select the necessary materials
1. Plastic pipes 60 centimeters long
2. 2 cans of spray paint
3. Plywood 91.4x60.96 cm. (0.37-1.27 cm thick.)
4. 4 pcs. pipe clamps
5. Drill
6. Mattress for a berth of size 101.6x76.2 cm.
7.20 screws
8.20 nuts
Step 2: Cut Plastic Pipes
Reduce the length of the pipes to 60.96 cm., Connect them to the adapters and rotate 90 degrees. You should get 8 parts of pipes up to 60.96 cm, and 2 parts should be 71.12 cm each. Cut the pipes and sand the cut points with sandpaper.
Step 3: Cooking the Frame
Attach two pipes in parallel to the head of the bed (see photo). And we install a pipe from the bottom of the frame for more stability of the bed.
Step 4: Prepare the Plywood
Lay the plywood on the bed frame, and mark where the holes will be made. Then we insert the screws and tighten them on the reverse side as tight as possible.
Step 5: Paint The Base
Choose your favorite paint and apply it in even layers.
Step 6: Place the mattress on the bed frame
Done!
So fast and easy, you can make a sleeping place for your pet.