» Furniture » Cabinets and shelves Do-it-yourself hidden pantry shelf

Do-it-yourself hidden pantry shelf


Do-it-yourself hidden pantry shelf

Everyone knows about a secret place that is between the refrigerator and the wall, right? Little to know, time to fill the space! This instruction can just help.

Step 1: stocking up materials

1. wooden board 61x122x1.9 cm.
2. a wooden board 12.7x120.3x1.3 cm.
3. 6 pcs. wooden boards 61x10.2x1.3 cm.
4. a wooden board for the base 61x10.2x1.9
5. pen
6. glue
7. screws

Step 2: Getting Started Making Shelf





Depending on the width of the space between the refrigerator and the wall, cut the wooden planks. For the lower shelf, use prepared boards measuring 61x10.2x1.9 cm. For the upper shelf, use one of the parts measuring 61x10.2x1.3 cm. After we have prepared all the details, glue them and fix them with screws.

Step 3: Install the shelves



And so, we get 5 pieces. We install them from top to bottom among themselves at such a distance: 11.4 cm, 16.5 cm, 16.5 cm, 23.4 cm, 28.6 cm.

Make holes and fasten the strap screws. The space between the shelf and the bar will depend on what you store there.

Step 4: Final Touch


Install the rollers (wheels). To do this: determine the central location of the base and tighten the wheels. If you do not want the rollers to be visible, fix them with hot glue to the base.

Pull out the pantry on wheels and determine where the handle will be. Find the center of the surface and drill 2 holes, screw the handle.

Everything is ready, now you can test the finished product. With the help of simple instructions, we have made an indispensable hidden storage room.

10
8.7
7.3

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
3 commentary
Yes, for example, I would also make a matchbox, but not like that. It is not dusty in the case, and everything is static relative to the walls / refrigerator.And it would decorate somehow the butt "under the refrigerator" so that it looks the same ..
In general, it won’t suit me. I have a sliding door behind one refrigerator hiding when I open it, an aluminum step-ladder “lives” behind another, so that my wife has access to the upper shelves of the sliding wardrobes. Where can I put it so that I’ll have it at hand and not visible.
But idea good one.
What is an excellent idea? In the use of free space?
1. The dust collector is still the same, wipe and rub every small thing every week.
2. After a certain period of operation, the frayed walls of the refrigerator and walls.
Since there is no vertical fixation.
3. To put or take from the lower shelves, we must try (figure SJ!)
What have you already said.
There is an idea, no clever thought.
Great idea! And the execution is the same. I would make the distant vertical wall a little higher, and a limiter, for example, a santechurup, would drive a wall a little higher than the upper horizontal shelf and a little deeper than the frontal plane of the refrigerator so that the shelf would not be able to fall to the floor when it is completely rolled out.

We advise you to read:

Hand it for the smartphone ...