In the manufacture homemade it is often necessary to drill the materials used in the work. But often drilling with a conventional drill or screwdriver is not very convenient, so we offer an overview of the video for the manufacture of a simple drilling machine.
Let's start by watching the author’s video
What we need:
- wooden plank;
- wooden base;
- self-tapping screws;
- metal guide for of furniture;
- wooden plank;
- metal corner;
- metal plate;
- wooden countertop;
- spring.
The first step is to attach a wooden plank to the base. It is advisable to take a heavier base so that the machine holds well.
Next, we take a metal guide for furniture and attach it to the plan again using self-tapping screws.
After that, we take a wooden board and drill a hole on it along the diameter of the drill. This can be done with a nozzle for milling cutters.
The next step is to take a metal corner and fix a metal plate on one side.
We attach the corner to the board.
The resulting construction of the board and corner must be attached to the guide.
We proceed to manufacture the handle so that the platform with the drill can be moved up and down. To do this, we attach a corner to the base of the machine.
We attach a wooden handle to the corner with a self-tapping screw.
Next, we take a steel plate and fasten it to our platform.
The second end of the plate is connected to a wooden handle.
You can fix the drill on the platform using a metal clamp.
To give greater stability, you can attach the entire structure to a wooden countertop using the corners.
At the very end, we take a spring, which we connect the platform to the stand and attach on the basis of a piece of the board, making a recess on it. This board will serve as a stand for the machine.
