Mankind has always sought to create alternative methods of generating electricity. The result of these aspirations was solar and smoke generators, as well as other devices that allow you to get electricity in a non-standard way. This article will provide an overview of the video on the manufacture of such a generator, which will allow you to get electricity.
Let's start with the author’s video
We will need:
- several molds for ice;
- Apple vinegar;
- copper wires;
- nails;
- nippers.
First you need to cut the copper wires into 5-centimeter pieces. This can be done with bare hands, but to facilitate the work, we recommend using wire cutters.
Next, the resulting pieces must be carefully twisted and screwed onto the top of the nail. Such nails with wire need to be done by the number of cells in the mold, so we advise you to be patient. The author, for example, has 32 cells, and he uses 16 nails.
Next, pour apple cider vinegar into ice molds. You need to fill in about half, but not scary if you poured a little more, because you can drain excess vinegar using a tube.
Next, we take the nails with copper wire and place them in the molds so that in one mold there is one nail and wire, with the exception of the two extreme cells. For greater clarity, we present the final result in the figure below.
The author’s test using a multimeter showed that such a generator produces 2.5 volts. You can increase the voltage of a homemade generator by adding vinegar to free cells and adding nails. The addition of vinegar in 4 cells increased the power by 1 volt. To connect the LED, you need 4.5 - 5 volts, so you have to pour vinegar into 16 cells.
Let's move on to connecting the LED. It is enough to dip the contacts of the LED bulb into the extreme cells with vinegar to light it up.
The author’s test using all 32 cells showed that such a generator can produce 12 volts. With an increase in vinegar concentration, stress can be increased.
Homemade generator is ready.