Often when repairing or manufacturing another homemade it can be difficult to keep track of small metal parts. The solution to the problem may be the presence of a magnetic bracelet on the arm. This review is devoted to the manufacture of just such a bracelet.
We recommend starting with watching the author’s video
So we need:
- any dense fabric;
- Velcro
- threads with a needle;
- a pair of powerful.
The author of the idea uses the strap from the bag as the main material. We’ll add from us that such a material can be an excellent choice, because it was he who proved himself to be the best in the manufacture of bags. The powerful neodymium magnets that the author uses can be removed from the old hard drive. Let's get started.
We measure the necessary length of the future bracelet. We leave a bit with a margin to sew on Velcro and cut off the excess.
Sew the Velcro to its place. When using the strap from the bag, this can be done with ordinary threads.
Do not forget about the second half of the Velcro, which should be sewn on the other side.
Now you need to attach magnets. Put them on a bracelet and make sure that they do not fall out. This is not so difficult to achieve.
We take the extra piece of the strap cut off at the beginning of manufacture and cut the rectangle out of it again.
We attach magnets to the cut rectangle. For greater reliability, you can sew them.
After that, we sew the resulting rectangle with magnets to the base of the bracelet. It turns out that the magnets are in the fabric.
After that, we can say that the arsenal was replenished with another useful tool that will save a lot of time and nerves, because small metal parts and even small tools will not be lost.
