Coffee lovers will love this review in the morning, because in it we will present a method for making a coffee machine with our own hands.
Let's start with the author’s video
We will need:
- copper or polypropylene pipe;
- funnel;
- a hacksaw;
- filter for coffee;
- coffee;
- gas burner or soldering iron for pipes;
- three knees;
- two tees;
- two stubs.
According to the author of the idea, when buying a funnel, you should pay attention to the quality of the plastic from which it is made, since it should not be afraid of boiling water. Let's get started.
First we need to divide the pipe into small pieces. The length of the first segment should be equal to 15 cm, the next two segments should have a length of 8 cm, two more 15 cm and one 5 cm long.
We take a hacksaw and cut out all the necessary segments.
Let's start assembling the design. Let's start with two 8 cm pieces that need to be connected with one tee. Next, we put one knee on the free ends of 8 cm segments and connect two 15 cm segments, close the ends of these pieces with plugs.
In the free hole of the tee connecting the two 8 cm pieces, insert the third 15 cm piece.
At the end of a 15 cm piece we put on a knee, a 5 cm piece and another tee.
We paint the resulting structure with spray paint of any color.
Our coffee machine is ready. It works according to the following principle. Insert the funnel into the top tee. We put a coffee filter in the funnel itself.
We take coffee and put a couple of teaspoons on the filter.
We boil water in a teapot and pour it into a funnel.
