We present an overview of a very useful video on the manufacture of a portable and powerful quadcopter vacuum cleaner from an engine.
Let's start with the author’s footage
So, for the manufacture of a vacuum cleaner, we need:
- a small plastic round container;
- metal clamp;
- watering can;
- gauze;
- a piece of gum;
- battery 18650;
- battery box;
- switch;
- an engine from a quadrocopter with blades.
At the very beginning, you need to cut the bottom of the tank, and also make a large round hole on the lid.
You will also need to take two aluminum wires. Using them and a piece of rubber, you need to fix the engine in the clamp.
Wires are also needed in order to fix the engine in the tank. To do this, we turn the ends of the wire into rings, make holes for the screws on the walls of the tank and thus fix the engine.
Next, we fix the button on and off the engine on the side of the tank.
It's time to connect the wires. The positive lead from the battery can be drawn through the switch, and the negative lead can be connected directly to the engine.
We glue the watering can at the bottom of the tank, where we also made a hole at the very beginning of the work. You can glue it with a glue gun.
We also glue the battery box on the case with the same glue gun.
Finally, we install gauze, which will act as a filter. We put it on the neck and fix the lid, which also cut a hole.
Our miniature vacuum cleaner is ready.
