Any fisherman knows that the feeder is simply indispensable for bottom fishing. This gear must certainly be equipped with a load or feeder. The bottom line is the continuous feeding of the fishing area, while reloading is allowed at any convenient time. Making a feeder yourself is not at all difficult.
Tools required:
1. A bottle of plastic.
2. Soldering iron.
3. The wire.
4. Lead strip.
5. Marker.
6. Scissors.
7. The line.
8. Stapler.
Operating procedure:
A pre-prepared plastic bottle is taken, which is easy to get in any home. It is brought to the desired state by getting rid of the neck and bottom. Thus, a cylinder is obtained. It is neatly cut across. The resulting blank is laid out on the table.
The size of the future feeding trough is checked. It is advisable that it be within 6 by 13 cm. If everything is correct, you can start marking the holes. They should be staggered approximately 2 cm apart.
The cut blank is folded in the shape of a cylinder with an overlap. The edges are best joined with a stapler, but staples or paper clips can be used. If there are enough skills, it is good to make holes directly in the place of the overlap. At the same time, the edges are soldered at the sites of cauterization. A lead strip will conveniently close the formed holes.
Now you can burn holes marked with a marker. It is easiest and better to do this with a hole punch or by drilling, as the plastic does not deform. In this case, it is recommended to place the product between sheet gaskets of large thickness. You can make holes with a soldering iron.
Next, the mounting unit is made of a lead plate bent to the size of the feeder. A suitable cylindrical frame is made of a ring, it goes around the plate, twisting is done.
The mounting unit is put into place, the plate is clamped on all sides. This ensures a strong fixation of the node. The plate and plastic will provide the necessary lack of resistance for the feeder, so that it will pop up easily and quickly.
A plastic bottle is a material that is easy enough to get. From garbage, it turns into a base for making convenient fishing fixtures. And any person can carry out such manipulation using the simplest tools.
