Storage of garden equipment for summer residents turns into a real problem. It is especially felt if there is a barn, but it is very modest in size. Then the barn turns into a huge dumped pile of shovels, choppers, rakes and other needs. It turns out to be easier to solve this problem and now you will see for yourself.
To make an organizer for garden tools do it yourself, required:
- plywood sheet
- Screws
- PVC pipe scraps, you can take a whole length of about 2 m
Now let's get down to making the organizer itself. This process does not take much time, but the benefit from fixtures you will feel right at the end of work.
1. If the whole pipe is used, then take a saw or a hacksaw and cut it into equal pieces. If only trimmings are available, they must be adjusted to the same size, otherwise the look of the organizer will not be very aesthetic.
2. It is necessary to saw the pipe at an angle, in order to subsequently facilitate the work of screwing in screws.
3. When the cut and fit are finished, it is necessary to process the sharp edges with sandpaper, thus eliminating all roughness.
4. The only thing left is to screw the pipe pieces to the wall. If you do not want to drill many holes in a brick wall, then a sheet of plywood will come to the rescue. We fasten the plywood sheet to the wall and we already fix the pipe scraps on it with the help of screws.
5. Now the organizer for garden tools is ready. If there is a desire and inspiration, then as a final touch, you can think of where a particular instrument will hang and attach a label with the name of this or that instrument to this place.
As you see, everything is simple - each tool will now be in its place and even the smallest one can easily find it country assistant.
By the way, I must warn you that there are still disadvantages of this device - all the work will be completed on time and no one will be able to steal away due to the fact that it was not possible to find a shovel or rake. It’s a joke, but there is some harsh truth in it.