Very simple and sometimes so necessary device, like a laptop table, you can do it yourself by spending at least time assembling it. The design is very simple and does not require special knowledge and effort. If you have a need to buy a folding table for a bed, think about it, because you can do it yourself, spending a lot less money. Most of the time it takes to find the right materials. The assembly itself takes no more than 15-20 minutes.
Materials and tools:
- Shelf 60x40 for countertops
- 2 smaller shelves for legs 40x31.
- door hinges 4 pcs. To make the table folding.
- a couple of bars
- screws about 30 pcs
- screwdriver
Detailed manufacturing description:
The mount itself, which we will need, its design is quite simple.
There is a latch on the hinge that prevents the legs from folding when using the table.
In this photo, the latch is in working condition.
When we are all studied, you can begin to assemble the table itself. The legs are 31 cm high, will not fit into the countertop when folding, since its length is 60 cm. Therefore, you need to put them with an overlap to the left and to the right of the countertop itself. When folding, the legs will become parallel to the countertop itself, which will be convenient for transportation, and in general the table itself will take up much less space if not in use.
Further, using a ruler, a place for loops is planned, it is necessary that they are at equal distances, and parallel to each other. Drill a thin drill hole for future screws. Further, the fastening itself to the countertop is simply screwed on.
It will turn out like this. A similar procedure needs to be done, on the other hand.
The design flips over and the table is ready.
This is how it looks when folded.