For work, we need:
Boron machine;
Scissors;
Pencil, marker;
Two sheets of paper;
Ruler
Gas-burner;
Spray paint;
Building corner;
Bolts
Plastic pipe;
Sandpaper.
1. Draw and cut the contour of the wing on paper.
2. Circle the wing contour on a plastic pipe.
3. Cut out the wing using a boron machine, jigsaw
4. Warm up the wing with a gas burner, you can also use a gas stove
5. Sand the edges of the wing with sandpaper
6. Align the edges of the wing.
7. drill a hole for attaching the wing to bike. A furniture corner should be used for the rear wing. To protect against vibration, you can fill the nuts with hot glue.
8. Using the spray paint the wing.
9. Attach the wings to the bike. The front wing is mounted under the front fork with a bolt and nut. Place an engraver to protect against vibration. The rear wing is attached using a furniture corner. The furniture corner is attached to the wing with two bolts and nuts. For better reliability, install engravers and fill the nuts with hot-melt adhesive.