When hunting, you constantly have to face different situations, analyze, make decisions, and also plan any actions for the future.
The main task of any hunt is to comply with safety precautions, namely the preservation of their health and the health of partners. It is also very important to keep your gear, equipment and weapons safe and sound.
One of the biggest drawbacks when hunting horses is dropping the legs into stirrups, as well as getting stuck in them. As a result of this, there is a problem with pulling out the legs. There are situations more pleasant, especially if the horse is dragged. In such a situation, there is generally no way to free the legs from the stirrups when falling.
The best solution is to make yourself safe stirrups. do it yourself and be sure of their quality.
For such a thing, you can take a steel bar. A steel bar is just very well suited for such home-made work. The basis of the size in this article will be the 45th size nts.
Stage 1.
First you need to bend the sole part and weld the crossbars with a welding inverter so that the foot does not fall inside.
Stage 2.
Now we need to take for example the available stamped stirrups from the drill saddle and adjust them to the width of their high boots. Next, weld the main arc. It is necessary to weld the main arc from a thicker reinforcement in the section.
Stage 3.
Next, you need to cut out the side arches, narrowing them up and with an oblique cut to the upper arc. This is done so that there is an exact match.
Stage 4.
Now you need to fit exactly in size and bend the front arc in high boots. For fastening stirrups to the tramp, the best option would be a large chain link. The oblique section and the excess part contained in it must first be cut out.
Stage 5.
So, in order to make sure that everything is done well and correctly, you need to try the link to the load, see if it is holding well and whether the couples come in without any problems.
Stage 6.
If everything was normal with the load, you should take up the painting. You can paint in any desired color. This can be done, for example, with paint for disks auto.
Stage 7.
Now you can collect all the hangouts and stirrups, fix them on a drill and be sure to test.
Sensations should be pleasant. Feet are good to feel the existing broad support, and stirrups should not be twisted, since they are welded to the mount of the mockery (as in branded sports stirrups). Inserting feet into stirrups should be simple, convenient and effortless. And on a trot, support should be felt underfoot.