Nowadays, to afford a new good door made of wood is not cheap pleasure. At the moment, the door market is dominated by empty ones inside, and only seemingly wooden goods from the outside. And if it seems to you that your old wooden door does not quite fit into your interior, do not rush and throw it out. This method of repairing a door is very simple and will hardly take your time.
In this type of repair, decorative PVC panels are used, which is quite a budget and a simple option. They will help to give a normal door a presentable look.
Tools and materials:
- PVC decorative panel
- scissors
- polymer glue
Detailed manufacturing description:
In this article, before pasting the door, the author performed a number of preparatory work on wood. The ends of the door are cleaned from paint, sanded and painted in the desired color. The ends were painted white, in color with slopes and a door frame. The repair door is not continuous, so it is important to correctly measure the panels for cutting. There are 6 “windows” in the door, which means that there will also be 6. plastic sheets. If the door is solid, then it can fit into 4 sheets. The door will also be pre-lubricated with glue for better adhesion to the plastic. The panels themselves are easily cut with scissors.
After preparing each sheet, all sheets are lubricated with glue on the back side, after which they are applied to the door and pressed along the contour.
For more convenient fixing of the panels, you can use masking tape. After the second panel is already pasted, the sheets are fixed with adhesive tape on the sides and between each other.
In the same way, 2 middle and 2 lower sheets are glued to the door.
While, on the one hand, the door is already completely glued with plastic, a hole for the handle and lock is cut with a knife, the inside of the lock is inserted.
The door, on the other hand, is glued in the same way, and only after that the handle is installed.
The glue will dry out for about 4-5 hours, after which time the adhesive tape can be removed.
So, a fully finished door looks like.A minimum of money was spent on it, as well as little time. For all the work, not counting the drying of the glue, it took about two hours. No special tools or skills were needed for such repairs, and the result is pretty good.