» Fixtures »Adjustable DIY stand for tablet

DIY Adjustable Tablet Stand


Almost all of us use the tablet while holding it in our hands, but this is not always convenient and possible. Therefore, we offer you an article on how to make a convenient and adjustable tablet holder do it yourself in home conditions at minimal cost.

Necessary materials and tools:
- table lamp with adjustable tripod
- nippers
- allen key
- Case for tablet
- plastic

Detailed manufacturing description:

Step 1: First of all, we need to pick up a table lamp. A lamp that has an adjustable design is best suited, as this will allow you to move the tablet to a more convenient position.


Step 2: Having picked up a table lamp for convenience of further work, we cut off the plug.


Step 3: Next, we disassemble the lamp itself. Using a hex wrench, unscrew the lampshade. And remove it.



Step 4: Then we take out the cartridge and remove all the wires.




Step 5: We get from the package - this is something between silicone and epoxy from which it is necessary to make a thin sausage.



Step 6: Gently apply the finished workpiece to the rim of the lamp and gently glue the plastic cover onto it.



Step 7: We wait until the whole structure hardens.

And all the adjustable stand for the tablet is ready.
10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
why cut the cable 220 through it you can charge eh you didn’t think of the backlight and the fan, and much more would be cool))
Very original stand. Easy to use if you are sitting at the table. But already sitting on the couch or armchair, you cannot use such a stand, unfortunately ...There is another option for the stand, when the borders for the device are simply cut out of a wooden base - you insert a tablet there and use it for pleasure!

We advise you to read:

Hand it for the smartphone ...