This article presents and considers the technology of quick and high-quality (depending on the diligence and diligence of the master) manufacturing devil do it yourself.
Having made in this way many different little devils of different sizes and weights, you can choose your catchy and beloved.
Perhaps a devil is in the collection of every fisherman. Usually purchased devils often do not satisfy all the desires and needs of the fisherman to have in their arsenal a catchy and rewind mormyshka - a devil and use devils of different weights, sizes and with different hooks (thick, thin, dark or light) during winter fishing. And yes, experiments with the color of the devil's body have good results, depending on the illumination, the period of fishing and the depth in the pond at the place of fishing.
Naturally, all these subtleties affect the catch of the little devil in different winter conditions.
For greater maneuver when changing such a bait to another, in order to determine the catchability of exactly today's mormyshka, it is necessary to stock up with a rather large arsenal of different devils.
Thus, the question arises of a fairly quick production of regular and catchy little devils for their own needs. The method of manufacturing little devils considered in this article is good in that you can quite quickly make drafts of various weights, sizes and shapes, equipping them with different hooks, without bothering with molten lead casting and injection molds.
Having slightly refined the technique for making little devils, you can make them in this way without a loop, but with a hole in the center, which can even more affect the catch of the devil, which is made by yourself.
On the Internet there is a lot written about equipping devilish hooks, but there is no definite answer there. Almost every option of equipping the devil’s hooks with cambrices, beads, or whatever else, has the right to exist, since the angler believed in this devil’s equipment after the first bite, which means there will be more catches and bites.
So, we take 3 hooks of the same size, bite the eye of two of them and put on the beads. Then we twist them together with a thin copper wire, as shown in the photo.
Next, insert the hooks already twisted together into the drill chuck and solder it with acid and tin. Now the tee is ready.
Next, we make from lead two strips of the required size with cuts for hooks and solder the tee with tin and acid first to one piece.
Next, you need to grease everything with acid, attach a second piece and solder. You get such a blank.
Next, you need to trim the file and all the excess, and then with a scalpel to bring to shine.
Next, you need to start the painting process, and then dry. Usually fishing for such a little devil is done without any planting, but sometimes a little devil equipped with small cambricas works well.