So it starts country it's time, and this means that work begins in the garden and garden, as well as a wide variety of construction projects. For example, for those who decided to replace in their courtyard all the rickety fences after winter, or rather replace the fixing posts. In order to dig a variety of new pits, you will definitely need a standard earth drill, though since its cost is very high, then the best solution is to make it with your own hands.
Required:
- a disk from a saw;
- pipe pieces;
- small glands;
- welding machine;
- Bulgarian.
Step 1. The process of creating earth drills.
Step 2 First we need to draw an estimate, which in the end is supposed:
Step 3 You need to start with a pen
Step 4 First, a standard metal clamp is bent to cut the prepared pipe, and then holes for bolts are drilled.
Step 5 Then the clamp is scalded.
Step 6 After that, the nuts are welded.
Important tip
In order to weld all the nuts directly through the holes inside the pipe, first you need to screw a bolt on it, insert it into the holes and only then start to weld.
Step 7 Next, for the handle itself, you need to take two cuts of a standard thick rod, along the very diameter, so that the pipe enters, and it was also possible to tighten it with the bolts themselves. (This is best done in such a way that the handles can be removed, and the home-made drill can be freely packed in a car).
Step 8 Also on the rods you need to wear pieces of rubber hose for the best grip in terms of work with hands.
Step 9 Now, directly, the cutting tool itself needs to be made from circular saws, just cutting it into two separate parts, and then welding to the pipe itself at an angle of about 110-120 degrees, you also need to weld two small plates, as well as a sharp stake at the end .
