Great idea to make a barbecue grill do it yourself in home conditions. Such an original barbecue grill will allow you to cook a delicious barbecue or any other fried dish. The basis for it will be a chimney in black.
Necessary materials and tools:
- smoke pipe
- aluminum gutter
- bolts, screws and nuts
- roulette
- drill
- metal scissors
- clamps
- hammer
- shelf metal mount
- brackets
Step-by-step manufacturing:
Step 1: First, pick up the pipe. A heat-resistant chimney pipe is perfect.
Step 2: Then, using the boards and clamps, it is necessary to bend the two upper parts of the pipe. To do this, we will interrupt the pipe between the boards with clamps and beat with a hammer. Also on the other hand.
It should be like this:
Step 3: Next, we make aluminum grille device to support the coals. To do this, measure out the required size and cut out with scissors for metal. Remember the length of the grill should match the length of the pipe.
Step 4: To prevent the grill from bending during frying, it must be bent from two sides. We retreat a few centimeters from the edge and make small cuts. Using a hammer, bend to the bottom. For more detailed information, see the photo.
Step 5: Next, we will supply for the grill. To do this, we fasten the bracket to the wooden base.
Step 6: In order to attach the made stand, using a drill in the pipe we make four holes for fastening.
Step 7: We fasten.
Step 8: Next, we make the side grilles. To do this, cut out two gratings along the lateral diameter of the grill and attach.
That's all the home-made barbecue grill is ready.
