Hello, today I will show you the idea of how to make a leash do it yourself. If you are fishing, you probably often come across such a situation that the leashes have nowhere to store. Such a leader is not difficult to manufacture and you will not spend a lot of money on its creation.
Necessary materials and tools:
- tube (plastic or stainless)
- 2 traffic jams
- whetstone
- stick (hazel)
- self-tapping screw
- glue
- small screws
- thin piece of foam rubber
Step 1: First of all, we need to find the handset. I took a stainless steel from under the old vacuum cleaner. Then we need to plug one side of the tube, in my case I used a regular cork.
Step 2: Next, take a small bar and make it cylindrical in shape, its diameter should coincide with the inner diameter of the tube. This will be the cover of our diaper. The cap should fit tightly into the tube.
Step 3: Next we need to find a wand. The length of the stick should be less than the tube by as much as the length of the cap, which we did earlier. The diameter of the stick should be almost half the diameter of the tube.
Step 4: We collect the details as shown in the photo.
Step 5: Next, take small screws (I took them from children's toys) and screw them in a circle of sticks, as shown in the photo.
Step 6: At the other end of the stick, glue the foam.
And now our leader is ready!