All catwalkers are faced with the problem of sharpening claws with their pets. In this natural pet procedure, wallpaper often suffers, furniturecarpets. And to install a special fixtures there may not be enough space or animals brazenly ignore this item. In this case, you can draw their attention to the furniture, but build a scratching post from it.
Materials and tools:
1. Countertop.
2. Table legs in the amount of 4 pieces.
3. Insulation pipe with a diameter of 2.5 cm.
4. Sisal rope with a design of 30 m per leg.
5. Double-sided tape.
Operating procedure:
First you need to cut 4 pieces of insulating pipe. They should be equal in parameters to the table leg. Then these pieces are wrapped around the legs. In this case, the part where the gap is located should be turned inward - thus it is not visible. Clawpots sold in special pet stores are the same in diameter.
Double-sided tape is useful for fixing the material used. It is attached below, above and then along the entire length of the legs.
After this, you can start wrapping the legs with a sisal rope. Wrap should be as tight as possible. For convenience, it is recommended to start the procedure from the bottom.
To ensure the safety of the sisal rope, the bottom of the legs should be wrapped in white tape. In addition, this option looks pretty natural. Unscrewing legs will be a good option - in this case, with fast wear of the front, they can be easily changed with the rear.
Convenient and effective claw point ready! Now the pet will not spoil the atmosphere, and the design will be enriched with a unique piece of furniture.