Many of us eat chicken eggs for breakfast. We offer an interesting idea for making an egg-beater to give an ordinary breakfast a more original look.
Let's start by watching the author’s video
[media = https: //www.youtube.com/watch? v = _rAiMTgkUHY]
We will need:
- strong thread;
- a nail 70-80 mm long;
- juice straw;
- a piece of PVC pipe;
- screwdriver;
- glue gun;
- the egg.
The first step is to make a basket in which the egg will be attached. To do this, attach the nail head to the egg exactly in the middle, then glue the egg with hot glue to half.
When the glue dries, break off the egg and clean the glue.
Thus, we got a kind of holder for eggs.
Next, you should make a through hole in a piece of polypropylene pipe using a screwdriver or drill at low speeds.
We insert a nail with a holder into the hole made.
Then cut a piece from the juice tube.
Fill the cut piece with hot glue.
Insert a nail into this piece of tubule.
Finally, we attach a thread to the tube, fixing it in one position with a couple of drops of hot glue.
Our simple, inshell beater is ready. It works according to the following principle. Insert the egg into the basket, then twist the thread onto the tube, lay the egg on the table and pull the thread sharply, allowing the egg to spin on the table. Note that it is important to do all the work on a large table or in a plate. For best results, it is advisable to roll the egg about 5 times.
