» Equipment » All terrain vehicles » Tracked »Tracked all-terrain vehicle“ object 268 ”

Tracked all-terrain vehicle "object 268"

Tracked all-terrain vehicle

Today will be a general overview tracked all-terrain vehicle "object 268". So called his brainchild Igor Ivanov, a fan of driving in tanks, and on the site he is registered under the nickname "Igor53".

The caterpillar is already running to the delight of the owner. Here in this form he appeared before us.

Caterpillars are made of conveyor belt, tracks are made of half profile, and guides are made of plates. The plates are bent by an arc and welded from the inside to prevent the caterpillars from coming off during riding and turns.

Khaki, front lights and turn signals, windshield without wiper.

On the roof of the cabin there is a hatch for emergency exit from the cabin and, if necessary, you can get luggage directly from the cabin.

In the cockpit of the dashboard from the VAZ-2109. The seat is very comfortable and leverage. Ergonomics of the cabin are thought out to the smallest detail.

The engine compartment is still without a partition. The driver's cab and engine compartment are not separated from each other. But in the future everything will be. Access to the engine is provided from the sides, there hatches are opened the length of the entire compartment and a removable engine cover.

This is how the caterpillar runs through the snowy fields.



Consider now the filling of the all-terrain vehicle.
There are five wheels on board: a drive wheel-sprocket, a tension wheel-sloth, three support wheels.
The axles of the support wheels are welded tightly, the suspension without balancers.
The axles of the front and rear wheels are raised upward relative to the axles of the track rollers by 70 mm and the clearance is 270 mm.
The engine is from a VAZ-2109, carburetor.
Gearbox (gearbox) from the VAZ-2109.
Transfer box from the VAZ-2121 Niva.
Turns are made by braking disc brakes on calipers. Bridge from the classics. The differential rotation.

All terrain vehicle. Back view.

Departure for a run-in.



Swimming.



This was a brief overview of the tracked all-terrain vehicle "Object 268", made by Igor Ivanov.
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
1 a comment
The design is very simple and should be sufficiently reliable. The use of serial units in it makes it very maintainable. Interesting is the location of the engine of the machine. This has a good effect on the correct distribution of the mass of the all-terrain vehicle and its good stability during movement.

We advise you to read:

Hand it for the smartphone ...