A soft and comfortable chair will become an indispensable entertainment for your children. After all, such a chair does not have sharp corners and takes any body shape.
Necessary materials
- Fabric (breathable, dense) two-thread (3 meters).
- Plastic zipper.
- Fabric (dense) oxford. Black - 2.5 meters, white - 1 meter, and orange - 50x50 cm in color.
- Filler (expanded polystyrene) (200 liters). Available at a hardware store.
- Sewing machine.
- Threads, needles.
- Velcro (10-20 cm).
Manufacture
We sew an external cover
1. Cut out of black fabric, and fabric “two-thread” 6 side parts. They will serve as our inner and outer case. The sides should be in the shape of a pear. From below, their size is larger and from above smaller.
2. Cut the bottom from the same fabrics. The bottom should be larger, our cover.
3. Cut out the lid from the same materials. In order for our parts to fit together, you need to make it hexagonal.
P.s. The edges of the hexagon should be equal to the top and base of the pear.
4. Cut out the tummy for our penguin from white fabric. And sew it with a black cloth.
5. Next, we sew the bottom in the outer case. To do this, take a zipper, and at the edges we attach it to our black hexagon.
6. Then we sew the side parts to our zipper and the tummy.
7. Cut out the legs, from an orange cloth, 4 little things, and sew them together.
8. Cut out the eyes. To do this, take a white cloth, and cut out of it an irregular figure eight, and then two small, black circles. They also need to be connected.
9. Cut out the nose, two triangular areas. Also sew two parts. Sew the nose to our tummy, and sew the eyes on top of the nose.
10. We also cut the wings from the fabric, 4 triangular areas, and sew them to our torso.
P.s. Before stitching the orange fabric and the wings you need to fill them with cotton or polystyrene foam.
After all the actions, we should get such an external cover.
We sew an internal cover
It needs to be sewn so that our small balls of expanded polystyrene do not crumble.
11. It is sewn just like the outer case. In addition to attaching the bottom.
12. We will make a bottom on a flypaper for filling a cover. We cut the bottom into two parts, the first part should be less than the second. We attach our Velcro to both parts, overlapping the parts on top of each other.
13. We stick our inner case into the outer one.
14. We fill our penguin with expanded polystyrene.
15. Our chair - the bag is ready.