Making a soap bubble generator

SpecialVideo / Fixtures

We already presented the idea of making a generator for soap bubbles. We hasten to share another way that party lovers and parents will also like, who can make a funny toy for children.

Let's start by watching the author’s video

We will need:
- bottles for soap bubbles;
- motor;
- wooden plank;
- jigsaw;
- steel wire;
- fan;
- rectangular capacity

First, take bottles for soap bubbles, from which we need only rings through which soap bubbles are inflated. There are eight such rings in total.

We also take the cap from one bottle and make 8 holes in it around the entire circumference.

Through the holes we pass rings from soap bubbles.

The next step we will need any motor that will twist the structure of the cover and rings.

Also for the motor you need to make a small stand from a wooden plank. To do this, cut a bar of a certain length and in the upper part we make a hole along the diameter of the motor housing.

We fix the motor in the hole.

Next, take a steel wire and bend it as shown in the figures below.

We fix the bent wire on the rack using self-tapping screws.

Now you need to choose a suitable fan that will constantly blow to the rings. To do this, you can use a cooler from a computer or make a fan yourself, as the author does homemade.

If you also decided to make a fan yourself, then you will need a motor and a plastic bottle. Two blades will need to be cut from a plastic bottle and connected to each other with a piece of plastic. Finally, the design of the blades will need to be fixed on the motor shaft.