We present to your attention an interesting idea for the manufacture of block onions from PVC pipes.
Let's start by watching the author’s video
So we need:
- PVC pipe
- 2 clips;
- wooden plank;
- jigsaw;
- a thick rope;
- Toothbrush.
The first step is to make shoulders for our bow. To do this, cut two pieces of pipe 44 cm long. According to the author, the thicker the pipes used in the manufacture of onions will be, the more powerful the onion will be.
The next thing we take is two clips that can be purchased in the automotive market. We fix the rollers at the edges of the tubes.
Before installing the rollers at the ends of the tubes, we make recesses.
At the other ends we make through holes for the bolts.
We proceed to the manufacture of the handle. To do this, draw a drawing on a wooden board and cut it out with an electric jigsaw.
At the edges of this handle, at a certain angle, you need to attach the shoulder tubes with the help of screws.
Let's move on to fixing the bowstring. We fasten one end to the upper edge of the shoulder, thread the rope through two rollers, after which we fix the other end to the other shoulder.
Finally, take care of the boom stand. To do this, make a through hole in the handle and attach the top of the toothbrush.
Our bow is ready.