Portable audio speakers are very convenient, variations when they can be used, not counted. It often happens that used speakers are left without a hull base, but they can still serve quietly. The solution in this case is one - to build a new building from improvised materials and give the speakers a new life. And the people around are in a great mood.
The case will be in the form of a wooden box - a box painted with acrylic paint.
We complete the required spare parts:
To make
- Amplifier 6-12V and 2 A.
- Speakers - 20 W or more.
- Adapter 6-12 V and 1.5 A output.
- Block ACS.
- Wires.
- A rubber piece.
Execution sequence
First stage. Connect the elements
We connect all the elements that have been prepared according to the plan shown in the image. When connecting wires, it is necessary to observe the polarity.
Second phase. Box cube decoration
To begin with, it is necessary to build square wooden blanks. Next, make holes with a round shape on the sides and top. Their diameter is determined directly by the size of the columns. The side surfaces are fastened together with masking tape. It is appropriate, since during painting, it will be possible to disguise it in such a way that no one will notice.
If this method does not suit you, then the walls can be connected with small cloves. Once the workpieces are done, install the speakers inside, pass the cord for the speakers through a small hole in the side wall.
Paint the resulting product with acrylic paint, dry it and you can apply it. Have a great time!