Such a stove will be a great bonus for those who love tourism. With it, you can quickly heat water for tea, boil a small portion of soup and even fry a barbecue. The main advantage of such a stove is that it requires very little firewood, it’s literally a couple of slivers and sticks. Thanks to a special boost system and flame concentration, food is cooked quickly and does not burn. This device is very light and does not take up much space, so it makes sense to always take it with you on the road.
Such a furnace can be made from improvised materials, and the whole process will not take much time.
Materials and tools for the manufacture of the furnace:
- a large can;
- iron bowl;
- metal hanger;
- barbecue paint;
- bolts;
- marker;
- pliers;
- drill;
- Dremel and cutting disc to it;
- aluminum plates.
Furnace manufacturing process:
Step one. Create markup and drill holes
On the bank you need to make a markup where the holes will be located. The easiest way to do it is with a marker. In the bottom of the can, you need to make markings for 16 holes, they will serve to take air. The top of the can should have 8 holes. The most important thing is that the holes are at the same distance from each other.
Now the holes can be drilled. As for the bottom, they are made using a drill. The top of the hole will have to be cut out. In total, you need to cut not 8, but only 7 holes, that is, one mark in the upper part should be intact.
Then the jar needs to be turned upside down and three holes are drilled into the bottom. Also, in the same order, three holes need to be drilled in a metal bowl. They will serve to connect the elements with each other.
Step Two Assembly assembly
Now the bowl and jar need to be connected to each other. For these purposes, bolts with nuts are used. Nuts are needed long, they will play the role of peculiar legs.
Step Three Working with Dremel
In order to be able to lay chips in the oven, you need to make a special window in it. It is made opposite the top untouched mark. It is best to use a Dremel with a cutting blade for such work. In conclusion, the edges of the cans need to be carefully processed, this will avoid cuts when using the device.
Step Four Making a handle for the stove
To make a pen, you need to take a wire hanger. Then two holes are drilled in the bank and then a handle is fastened with them.
Step Five Create a tile for the burner
To raise the flame above the air intakes, you will need to create a tile. It is made from the lid of a can. Using a drill, you need to make several holes in the lid so that air can pass through it. In order to fix the cover, you need to drill three more holes, then bolts are installed in them and long nuts are screwed on, then they will serve as legs.
Step Six Painting the stove
You need to paint the stove only with special paint for barbecue. It is heat resistant and environmentally friendly. As a result, the stove will take on a more interesting, marching appearance.
Seventh step. We make a grill for the stove
There are many options which grills can be placed on such a stove. You can make them several for different purposes. For example, one grill can be for barbecue, and one for installing a bowl or teapot. To make the simplest grill, you will need several aluminum plates. They are connected as shown in the photo.
There is an even simpler option on how to make the grill. You can find another lid for such a can and make a lot of holes in it.
That's all, now the stove is ready for use. You can try it out. According to the author, such homemade able to bring to a boil 2 liters of water in about 15-20 minutes.
