» Topics » DIY ideas »Water supply at home without a well and a well. What to do if in the middle of winter the well stopped working

Water supply at home without a well and a well. What to do if in the middle of winter the well stopped working

Many residents living in their own house use water and wells to provide water. Nowadays, most people no longer go to the street with a bucket or a flask for water, but spend water in the house by installing a pump that maintains the necessary pressure. There are all the possibilities, there are plastic pipes and all other accessories on sale. Anyone can, if they wish, independently carry water into the house. But sometimes difficulties can arise. For example, suddenly in the middle of winter there will be problems with a well or a submersible pump. And now I also had problems - water disappeared and before the onset of heat there is no opportunity to restore the well or to drill another one. There was only one opportunity left to provide the house with water - to take buckets and go to the column, then put the washbasin since you can no longer use either the faucet in the kitchen or the shower. Such a prospect somehow did not please me. Thinking, I decided to build just such a system. Of course, you will have to go to the column for water, but I fill it directly into the system from the street, without going into the house. Now the house is provided with water and all previous conveniences are preserved. I drew a diagram roughly, not respecting the proportions but the meaning is clear.
Water supply at home without a well and a well. What to do if in the middle of winter the well stopped working


The reckless pump is in my underground, there I installed a water tank of about 100 liters.


I made another lid for the tank from wood and drilled holes for pipes in it. I bought pipes at a hardware store.

The filler neck was made from a five-liter bottle. The pipe goes underground through an outlet.

It took three hours to assemble the structure. One problem remained - how to find out the water level in the tank.

At first I made a simple system with a float, the thread from the float was thrown through a block taken from an old reel tape recorder, a load was tied to the end of the thread. Then he improved the pointer by collecting a simple electronic scheme.


Of course, 100 liters is not enough and water often has to be added, but the whole system is done temporarily until the opportunity to restore the well comes.
Question \ topic is automatically published in the social. site network - stay tuned for answers there:

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
1 a comment
When 10 years ago I moved to live in a village, I also suffered from water and buckets. Then at the station (!) I saw passenger cars fill up with water and did the same at home. Four tanks per 100 liters were installed in the attic, connected by pipes and put a float from the toilet. Once every three to four days, unwind the hose 30 meters and connect it to a column on the street. In an hour, water is drawn, the float closes and the hose flies off the column itself. We leave, we reel the hose and use the stored water. Even the pump is not needed, the drift is good.

We advise you to read:

Hand it for the smartphone ...