» Fixtures » Instruments »Mini do-it-yourself cutting machine

DIY mini cutting machine


Hello dear friends, today I will show you a wonderful idea on how to make a mini cutting machine. With this machine you can cut various shapes on cardboard, polystyrene and other materials. To create it does not require a lot of materials and it can be done in minutes.

Necessary materials and tools:
- 2 Kinder Surprise Jars
- batteries
- motor
- wires
- switch
- electrical tape
- hot glue
- stick from lollipop
- soda lid

Step 1: First, take 2 Kinder Surprise jars. And cut off the covers which are larger. At will, you can find any other jar.


Step 2: Then we take 2 batteries at 1.5V and glue the wire with glue + to -. It is better to take a 9V battery so that the motor is more powerful.


Step 3: Then in one of the covers we make holes for the wires and the switch.

Step 4: We glue the motor with glue.

Step 5: Next, connect the wires to the batteries. And we collect everything else according to the scheme.



Step 6: Then we take a stick from a chupa-chupsa 2 cm long. And we fix it on a motor shaft.

Step 7: Take the soda lid and flatten it. Then we cut out the cloves with scissors.


And now our mini cutting machine is ready!

Test:
[media = https: //www.youtube.com/watch? v = 4t3YCImiBtE]
0
0
0

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
12 comments
Damn .... Oh, these tyrnete !!!! I equated my "apple feeder" ...))))). I looked without context, reading only my last .....
Although .... "Saw" is also the same in usefulness ....)))) Why is it a sin to conceal))))). But to do something interesting!
Well, why so cruel))
But such a device is not inferior in utility ...
Probably, it’s necessary to set the “apple feeder”))))))))
this is primarily creativity. There are artists, there are singers, there are clowns, skiers, snowboarders, etc. Do they bring any benefit? Not! A man and a fellow are engaged, this is much better than pricking and sniffing glue.
Dear friends, I didn’t understand how old the author of the discussed Mini-Cutting Machine homemade product was, but if he is 8-10 years old, you can talk about something and even praise him for his zeal for creativity (even if it’s useless).
But if he is even a little over 10 years old, then we must honestly say that his "creation" is complete nonsense, which is not worth any praise, for, it is nothing more than NOTHING.
It is necessary to explain to children that any homemade product should be useful and applicable in life, and to make “Mini Cutting Machine” out of a beer cork is so naive that it’s not worth wasting time and energy, let alone discuss the performance of this garbage and ( with a serious look) to offer instead of the specified motor from a children's toy an engine worth 3,000 rubles, which is nothing more than an advertisement for this engine.
Gentlemen, do you have nothing to do? Offer a normal homemade product that can be easily made and used in everyday life to make life easier.
So for example, I showed capacity, this one is clear that it is expensive (it goes for cnc), but there is much cheaper. I think the message is clear - such a machine requires a more powerful and revving engine.
Excuse me generously ....))) But I bought an engraver in a suitcase, with a "trunk" and a bunch of nozzles .... well, somewhere just for the cost of this motor ....)))))
The author clearly chose the wrong engine, you need to take type of - more powerful and resourceful:

And even such unpretentious cartridges:

And a snap for them.

That will be the case!
Yeah, reduce !!! How is it? .... And then where to buy a half-centimeter foam to cut? !!!! ))))))))))
in order to make brains like you and I)))

and the cutting wheel must be reduced, the motor does not pull ...
Maybe I don’t understand something, but please explain to me the scope of its application in practice. I'm not talking about the engraver (Dremel)! It is clear that this tool will not compete with him ... But explain to me what it is better than a simple technical, or knife? !! Or, even clerical ?? I don’t really understand what kind of work it is needed for.

We advise you to read:

Hand it for the smartphone ...