With the onset of spring, each summer resident is faced with the task of planting seedlings and their further planting in open ground. But for seedlings to grow stronger and grow faster, it is necessary to create the appropriate conditions for its growth. Such conditions include greenhouse cultivation, both seedlings and vegetables and herbs.
In the greenhouse, very comfortable conditions for plant growth are created - these are factors such as increased humidity, heat, the absence of drafts and wind, the release of oxygen by plants in such a closed warm room for seedling growth is just heaven. But building a greenhouse is a costly and troublesome business and requires a lot of investment in its construction. Of course, having your own capital greenhouse is much better, but for lack of a better way, you need to look for simple and affordable options for building and operating this facility.
The wit of our people always comes to the rescue, who will find a way out of any critical situation in life. The author, having no capital greenhouse in his household plot, decided to simplify the design and reduce the time for construction. But the idea is simple - you need to build a greenhouse from improvised means, and at his fingertips are plastic pipes and plastic film. This is all that the author used to build the greenhouse.
So now we’ll take a closer look at what the author needed and how he built the greenhouse on his site.
Materials: plastic pipe for 20 and one with a diameter of 32, plastic film, bricks, adhesive tape.
Instruments: hacksaw, hammer, knife.
The first step was to cut pipes with a diameter of 20 mm, three meters each, for the subsequent production of arches for a greenhouse from them.
Then he sawed a 32 mm pipe with a hacksaw onto small cuttings for the subsequent installation of 20 mm pipes in them, which act as arches of a greenhouse. And he knocks them into the ground, leaving a few centimeters above the ground.
Everything is done in the form of a rectangle - this will be the base of the greenhouse, this way.
Then it takes, pre-cut pipes, 20 mm in diameter, and from the beginning inserts one end into a pipe of a larger diameter, then bends and inserts into the other end of the pipe clogged into the ground, thereby obtaining an arc.
Further, the author, to strengthen the structure and give rigidity over the arcs, places the pipe and fixes it in this position with tape.
Then it covers the frame of plastic pipes with plastic wrap and applies bricks around the edges to avoid such an unpleasant moment when the wind tears off the film and drags it around the site.
That's all the simplicity of the design is completed in a few hours. Simple and cheap greenhouse design do it yourself Suitable for all, without exception, summer residents and owners of country houses.