Everyone self-respecting summer residentmust have a greenhouse or a hotbed in his summer cottage. Building a greenhouse is very expensive and troublesome. But the construction of the greenhouse, quite affordable and affordable for a simple gardener, and an amateur gardener.
The presence of a greenhouse in a personal plot increases the growth of seedlings, or vegetables and herbs already planted in it. The device of the greenhouse, the simplest structure on the site and is available for each summer resident. These buildings in different areas look different, it all depends on the imagination and creative data of the author. Someone tries to do without spending a penny of money, others build on the contrary from new materials, but the essence of this structure remains unchanged - it is planting seedlings in it for intensive growth, or the next planting of vegetables.
The author decided to make his greenhouse out of new materials, so that later on he would not be like this topic for several years. The greenhouse device is the simplest, and feasible for everyone. At the base is a box knocked out of boards and bars, then a frame is knocked together from the bars on top of the main box, it will serve as a mounting place for plastic water pipes that act as arcs on which a plastic film will be attached.
He made this design folding on hinges, and made the opening limiter in the form of a chain screwed to the box, and to the frame with pipes. Then he put a large metal mesh over the pipes so that the plastic film would not clap, and would tear less with this reinforcement. At the very bottom of the box, he also laid only a small metal mesh; it will serve as a restriction for all kinds of rodents and other pests to enter the greenhouse. That's essentially the whole idea of this design.
And so now we will examine in detail what was needed to build his greenhouse, and how he did it.
Materials: board 30 mm, bar 40 by 40 mm, plastic water pipes, plastic film, hinges, staples, chain, large and small metal mesh, screws, nails.
Instruments: hacksaw, hammer, screw-screw, knife.
And so, first of all, he prepares the place, having previously cleared it from the turf, and leveled it to zero.
He made a box, laid on the bottom a metal mesh with small cells from the penetration of moles. He also made a frame for attaching plastic pipes.
Then he made arcs and laid a metal grid on top of them. Fastened the frame with arches to the hinges for easy opening. He made a limiter out of the chain, so that the opening occurred at a certain angle.
Then the greenhouse box fell asleep. First, old twigs were laid, then a layer of manure, compost, and only on top a layer of fertile land. This type of bookmark will provide for a long time with all the nutrients to plants growing in the greenhouse.
Also, the author drilled a hole, and secured an adapter for the irrigation hose so that it was possible to water through the spray nozzle, and not run with watering cans.